When to Use Fiberglass Entry Doors With Sidelights

Some homes must endure tougher locations and more movement than others. When a house is without fair weather, or has more people moving around, in and out, the front door feels the brunt of these harsh conditions. One popular solution to these problems are getting fiberglass entry doors with sidelights. The use of fiberglass as surface material for doors is borne out of its resistance to warping, splitting and rotting compared to wood, especially under those severe conditions. It is energy-efficient as it insulates three to five times better and permits natural light into homes. It is also supposed to be eight times stronger than vinyl and twice as strong as steel. The addition of sidelights is not only to fortify entry and patio doors with extra support and insulation but also beautify doors further just like accouterments of a fireplace or wall.

Sidelights are narrow panes or windows added to the side of doors or larger windows. A door may have a single sidelight on one side or bifold sidelights flanking either side. This is often determined by the width of the entryway. Houses where the entryways are wider than general door sizes could use fiberglass entry doors with sidelights, one or two depending on what can fit in the entryway. A wood grain surface on these doors, which mirrors older solid wood doors, finished with various wood textures, is one of the most attractive qualities to buyers. Another is the make using fiberglass and composite material, which provides resistance to air and moisture penetration, insect damage and rotting, and stainless steel in various parts, which provides resistance to corrosion.

MASONITE EXTERIOR DOORS

Installation should be considered. For one, the door components do not disassemble easily. The actual door is likely attached to the frames of the sidelights, or a joiner accommodates the door unit and the sidelights. The threshold of the door is likely one single unit under the door and the sidelights. Replacing either just the door or the sidelights, or the frame from the threshold, may cause real damage. When priming, pre-finishing or pre-glazing comes standard with the product, it adds magnetic appeal to remodelers and homeowners. Glazing ensures that glass is protected and easy to clean. Priming gets the surface of the door ready for painting, pre-finished with a mahogany, oak or cherrywood staining. In this electronic age, it also still matters that the door has increased security, such as protection against forced entry in the jamb, lockset & deadbolt areas.

Quality should never be neglected, especially that fiberglass entry doors with sidelights constitute an entire door system with various components. Established door makers add enticement with tighter quality control and easier product access. Masonite operates one of the biggest research & development facilities, and Milgard makes most parts internally through its vertically integrated production. Benchmark by Therma-Tru is distributed exclusively at Lowe's stores, and Feather River, at Home Depot stores. SureFit provides full-service installation with sales support. An extensive store network providing fast, convenient access to products, and the bonus of doubling as a professional installation service, certainly makes for additional enticement.

When to Use Fiberglass Entry Doors With Sidelights

Ward Eichelberger reviews how to get the best from Fiberglass Entry Doors With Sidelights. Please visit his Fiberglass Entry Doors site for latest news.

MASONITE EXTERIOR DOORS