Paint a Door-Quickly and Properly
It's surprising really, how easy it is to paint a wood panel door; the process usually reduces down to a 30-minute project, requiring nothing more than a bucket of paint and a decent brush. With just a little preparation and patience you can achieve fantastic results.
MASONITE EXTERIOR DOORS
Follow these easy steps and your newly painted door will be a source of pride and accomplishment.
What you'll need:
o Primer - High quality, oil-based
o Paint - High quality, semi-gloss
o a 3-4" Black China brush (for oil-based paint) or a Synthetic Bristle brush (for latex paint)
o 220-grit sandpaper & sanding block
o Tack cloth
1. Prepare the project
o Avoid painting following a rain or in damp weather; the door should be finished right after the wrapping is removed.
o The more care taken in preparing the door's surface before painting, the better the results. Remove all hardware, and fill any nail holes with wood filler.
2. Prepare the door
o The surface should be clear of any dirt; it should be clean and dry. If there are any handling marks, you can remove them by lightly sanding the surface.
o Finally, wipe down the surface of your wood panel door with tack cloth to ensure a dust-free finish.
3. Apply the primer
o Apply primer in sections.
o When painting stiles and rails, use long strokes to prevent paint from pooling where the horizontal rails and the vertical stiles meet.
o Paint the four edges last (top, bottom, left, and right).
4. Allow the paint to dry
o Allow the paint to dry before applying a second coat. Consult the paint manufacturer's directions for drying times.
5. Ensure the quality of the result
o The entire door (all 6 sides) requires 2 coats minimum to ensure a complete seal; restricting moisture absorption and maintaining your door's warranty.
6. Reinstall the door
o You're finished! Now get that thing back in its opening, and put it to use.
How to Paint a Door
These tips are provided courtesy of Masonite, your resource for interior wood doors.
MASONITE EXTERIOR DOORS
0 comments:
Post a Comment